Brad point drill bit sets

Short Description:


Product Detail

HOW TO USE THE SAWBLADE

Product Tags

Article No. Pack qty ;
Diameter
Working Length
mm mm
598130 8pcs 3, 4, 5, 6, 7, 8, 9, 10 33, 40, 50, 60, 69, 75, 80, 87
582270

7.0

270 400
582275

8.0

270 400
582280

10.0

270 400
582285

12.0

270 400
582290

14.0

270 400
582295

16.0

270 400
582300

18.0

270 400
582305

20.0

270 400
582310

22.0

270 400
582315

24.0

270 400
582320

25.0

270 400
582325

26.0

270 400
582330

28.0

270 400
582335

30.0

270 400
582340

32.0

100 160
582345

10.0

470

600
582350

12.0

470

600
582355

14.0

470

600
582360

16.0

470

600
582365

18.0

470

600
582370

20.0

470

600

582375

22.0

470 600

582380

24.0

470 600

582385

25.0

470 600

582390

26.0

470 600

582395

28.0

470 600

582400

30.0

470 600

582405

32.0

470 600

  • Previous:
  • Next:

  • The use and maintain of the sawblade

    ◎ The carbide tip of sawblade is very sharp, so process of using must be prevent the carbide tip.

    ◎ PeriodicaI cleaning and support the machine,the spindle’s running tolerance must be less than h7.

    ◎ The flanges must be parallel to each other,must be of the same diameter 1/3 of the sawblade’s diameter(formuIti—rip saw blade is 1/2.

    ◎ When instaIIion the sawbIade,it shaII be 5-6 teeth higher than board surface.

    ◎ Before operation,check the firmly of the sawblade,be sure nobody in front of the machine. Do not feed of operation check whether the machine is good for operaiton. Periodical check the function of the machine,the certicaI jump is less than ±0.02MM,and the flap is less than ±0.01.

    ◎ After continuous use,must be removed and cleaning the sawblade,get rid of the resin and sawdust of the sawblade of both sides.Other wise it would beinfluence the effect of using the sawblade.

    ◎ Deposit of the sawblade,must not be layer the sawblade,it is putted in the originaI package inside.

    The renovate of the sawbIade

    ◎ The renovate of the carbide sawblade While it no longer sharpen and the horizontaI piece coarseaess. The power of using sawblade machine obviously Increase. When process materiaI,the materiaI appearred burst. The carbide tip exhaust more than 0.02MM.

    ◎ For the renovate the sawblade,it shouId be grinding by the a formal company, so be sure the quality of the sawblade after renovating.